Skip to main content

Linux makes it too easy

Start dhcpd on laptop, plug USD$29 wireless router in, read logs, point Firefox at resulting address, switch on WPA2 for security, give fixed external address which matches RoadRunner/Time-Warner cable modem’s expectations, set DHCP on router to hand out addresses in that range, save-n-reboot router, plug router into cable modem, plug original XP desktop into one of router’s switch ports, all systems go, run Mandriva’s wireless config thingy, 4 clicks, one WPA2 key password, done.

Quotaless cable connection (through which this post is happening) now works. Permanently. Without disturbing existing PC. From anywhere in the house or yard, including sunbaking on the swing-seat or grilling at the BBQ Grill, or seated in the Kia Sedona within the basement garage.

SSH empowerment permits remote management of machines in Melville, Carlisle, Northbridge, Brisbane. Would need a green card to work on a machine in nearby Chicago.

Comments

GregoryO said…
And thus Leon's IT Barter Economy is born?
14 July, 2009 20:13
Leon RJ Brooks said…
The concept would require some development, but I think you have a good idea, there. (-:
15 July, 2009 04:26
GregoryO said…
So long as the development is gradual and actual[1], I reckon you'll have no trouble. "Sure I'll fix your computer, come over and change my oil will ya?"... dealing with businesses would probably be a bit tricky though. In Australia some entrepreneurial friends of mine use and love BarterCard, but I suspect you'd need a Green Card to be involved in anything as official as that.

[1] as opposed to erratic and theoretical, although being erratic might not hurt :P
15 July, 2009 11:29
Post a Comment

Popular posts from this blog

every-application-is-part-of-a-toolkit at work

I have a LibreOffice Impress slideshow that I wish to turn into a narrated video. 1. export the slideshow as PNG images (if that is partially broken — as at now — at higher resolutions, Export Directly as PDF then use ‘pdftoppm’ (from the poppler-utils package) to do the same). 2. write a small C program (63 lines including comments) to display those images one at a time, writing a config file entry for Imagination (default transition: ‘cross fade’) based on when the image-viewer application (‘display,’ from the GraphicsMagick suite) is closed on each one; run that, read each image aloud, then close each image in turn. 3. run ‘Imagination’ over the config file to produce a silent MP4 video with the correct timings. 4. run ‘Audacity’ to record speech while using ‘SMPlayer’ to display the silent video, then export that recording as a WAV file. 4a. optionally, use ‘TiMIDIty’ to convert a non-copyright-encumbered MIDI tune to WAV, then import that and blend it with the speech (as a quiet b
1 comment
Read more

new life for an old (FTX) PSU, improved life for one human

the LEDs on this 5m strip happen to emit light centred on a red that does unexpectedly helpful things to (and surprisingly deeply within) a human routinely exposed to it. it has been soldered to a Molex connector, plugged into a TFX power supply from a (retired: the MoBo is cactus) Small Form Factor PC, the assorted PSU connectors (and loose end from the strip) have been taped over. the LED strip cost $10.24 including postage, the rest cost $0, the PSU is running at 12½% of capacity, consumes less power than a laptop plug-pack despite running a fan. trial runs begin today.
Post a Comment
Read more

boundaries

pushing the actual boundaries of the physical (not extremes, the boundaries themselves) can often remove barriers not otherwise perceived. one can then often resolve an issue itself, rather than merely stonewalling at the physical consequences of the issue.
Post a Comment
Read more