Skip to main content

Message to ANZ, tram count

Dear ANZ

The reason for installing an ATM (Automated Teller Machine) is to provide service when there are no human tellers available.

Such as early on a Sunday morning... which leads me to wonder why the two ATMs in your Glenferrie Road branch at Malvern are shut into a little foyer which is only open when the bank branch behind it is open?

YF, LB

Figured out why there are so many trams along this otherwise unremarkable chunk of Melbournea: the administrative district of Stonnington seems to have a tram depot inside it.

Tram runs off to the south-east or through places like Bourke Road to Camberwell are vaguely oriented on the depot.

Comments

Jack said…
You'll find you can swip your ANZ card to get access into the area to use the ATM.

It's used as a way to limit the 'attacks' on people using the ATM (ie: being hit from behind), etc.

It's used in many ATMs in the Melbourne CBD.
Leon RJ Brooks said…
jack: would be helpful if there was any indication of same visible on site. Not an arrow, not a word.

A nearby supermarket was open before 08:30 & did EFTPOS, so problem solved indirectly at the time.
Major said…
When I was working on ATMs and Internet banking systems it always struck me as odd that the business would insist that changes (and hence downtime) would be at midnight instead of during the day when their human tellers and phone banking system were available.
Anonymous said…
You will find that anything containing a mag stripe will work, such as a medicare card, a metcard ticket or a portion of any things with a magnetic section - it doesn't need much of it to work.

Popular posts from this blog

every-application-is-part-of-a-toolkit at work

I have a LibreOffice Impress slideshow that I wish to turn into a narrated video. 1. export the slideshow as PNG images (if that is partially broken — as at now — at higher resolutions, Export Directly as PDF then use ‘pdftoppm’ (from the poppler-utils package) to do the same). 2. write a small C program (63 lines including comments) to display those images one at a time, writing a config file entry for Imagination (default transition: ‘cross fade’) based on when the image-viewer application (‘display,’ from the GraphicsMagick suite) is closed on each one; run that, read each image aloud, then close each image in turn. 3. run ‘Imagination’ over the config file to produce a silent MP4 video with the correct timings. 4. run ‘Audacity’ to record speech while using ‘SMPlayer’ to display the silent video, then export that recording as a WAV file. 4a. optionally, use ‘TiMIDIty’ to convert a non-copyright-encumbered MIDI tune to WAV, then import that and blend it with the speech (as a quiet b

boundaries

pushing the actual boundaries of the physical (not extremes, the boundaries themselves) can often remove barriers not otherwise perceived. one can then often resolve an issue itself, rather than merely stonewalling at the physical consequences of the issue.

new life for an old (FTX) PSU, improved life for one human

the LEDs on this 5m strip happen to emit light centred on a red that does unexpectedly helpful things to (and surprisingly deeply within) a human routinely exposed to it. it has been soldered to a Molex connector, plugged into a TFX power supply from a (retired: the MoBo is cactus) Small Form Factor PC, the assorted PSU connectors (and loose end from the strip) have been taped over. the LED strip cost $10.24 including postage, the rest cost $0, the PSU is running at 12½% of capacity, consumes less power than a laptop plug-pack despite running a fan. trial runs begin today.