Skip to main content

Wireless rechargeable high-intensity reading light for $23.75

Ingredients: 1xLED Torch ($4 from Reject store), 3xAAA eneloop NiMH rechargeable ($6.50 a cell from Tricky Dickey), wire coat-hanger (free after shop use), super-glue ($1 for a pack of 4 tubes from Reject), large/thin peg (free from random source, guess about 12¢ ea in large-ish packs new). Will publish photos in a few days (’net access permitting).

Method: swap boring (Super Heavy Duty) AAAs with torch for rechargeable. Wind coat-hanger around torch to not obscure the unscrewable end, optionally super-glue into place. Match short straight length of coat-hanger against side of peg, super-glue it into place (range of about 45cm for large-ish books, 30cm for simple paperbacks.

Useage: click switch on unscrewable end of torch, clip peg onto book cover, read.

These little $4 torches have 9 very intense LEDs therein, so light up the book quite well; the “eneloop” badged (Sanyo) 800mAh AAA cells drive them quite brightly (will drive high-current loads like cameras quite well), & retain 85% of a full charge over an entire idle year, even in coldness.

Advantage in doing this manually is cost ($23.75 vs $33.95 plus batteries ($53.45 all up)) & immediate availability of readily rechargeable power cells & yer dunnit yerself (craftsmanship, even if (especially if) it takes a few tries to build the ideal beastie).

For bonus craftsmanship points, spung the LED assembly from the torch & tweak the LEDs to spread more, so cover entire page at a shorter range.

Buy 3 more cells & you can recharge spent cell sets faster than you can spend charged ones.

One-off construction cost: obtain a charger & 4xAA (not AAA, sadly) NiMH cells from BigW for $18.85 a set. Run camera, bike lamp, other devices on the AAs.

Optional extra mechanism: obtain clip-board, glue coat-hanger to clip-board (maybe in 2x locations) instead of peg, place book on clip-board to read.

Comments

Leon RJ Brooks said…
Just dabbled in a Noam Chomsky book, which quotes Wilhelm von Humboldt saying:

“man never regards what he possesses as so much his own, as what he does; & the labourer who tends a garden is perhaps in a truer sense its owner then the listless voluptuary who enjoys its fruits.”

I think that emphasises (in a non-tech flavour) a core principle of FOSS.
Leon RJ Brooks said…
Also discovered a Reject store in the Booragoon shopping centre, so now sand-gropers (as well as crow-eaters & probably others) can easily acquire this electrical wonderment. (-:

KMart also has rechargeable AAAs for about a dollar (each) less.
GregoryO said…
I got some NiMH AAs and AAAs for <$2 ea a few months ago - a friend of mine is a supplier of sorts. Minimum quantity of four. Not the largest mA rating, but a pretty good deal in my books.

Popular posts from this blog

every-application-is-part-of-a-toolkit at work

I have a LibreOffice Impress slideshow that I wish to turn into a narrated video. 1. export the slideshow as PNG images (if that is partially broken — as at now — at higher resolutions, Export Directly as PDF then use ‘pdftoppm’ (from the poppler-utils package) to do the same). 2. write a small C program (63 lines including comments) to display those images one at a time, writing a config file entry for Imagination (default transition: ‘cross fade’) based on when the image-viewer application (‘display,’ from the GraphicsMagick suite) is closed on each one; run that, read each image aloud, then close each image in turn. 3. run ‘Imagination’ over the config file to produce a silent MP4 video with the correct timings. 4. run ‘Audacity’ to record speech while using ‘SMPlayer’ to display the silent video, then export that recording as a WAV file. 4a. optionally, use ‘TiMIDIty’ to convert a non-copyright-encumbered MIDI tune to WAV, then import that and blend it with the speech (as a quiet b

boundaries

pushing the actual boundaries of the physical (not extremes, the boundaries themselves) can often remove barriers not otherwise perceived. one can then often resolve an issue itself, rather than merely stonewalling at the physical consequences of the issue.

new life for an old (FTX) PSU, improved life for one human

the LEDs on this 5m strip happen to emit light centred on a red that does unexpectedly helpful things to (and surprisingly deeply within) a human routinely exposed to it. it has been soldered to a Molex connector, plugged into a TFX power supply from a (retired: the MoBo is cactus) Small Form Factor PC, the assorted PSU connectors (and loose end from the strip) have been taped over. the LED strip cost $10.24 including postage, the rest cost $0, the PSU is running at 12½% of capacity, consumes less power than a laptop plug-pack despite running a fan. trial runs begin today.