Skip to main content

apt-got

I decided to have a whack at GIMP 2.4, & the easiest approach looked to be bolting the -rc3 from Gutsy into a Feisty machine I’ve set up.

One of the obvious updates was libc6. What was not so obvious was the libgcc1 & other “internal” dependencies which that implied, stuff like encryption & compression, right down to replacing a TrueType font with an updated version with a slightly different naming system, in order to please one of GIMP’s dependencies — but this broke a couple of games (Briquolo & CrystalSpace) so I had to upgrade those also (or scrub them off).

77 packages later, down a dialup link (uh, sorry, 79 packages with the games), it all seems to be working — except that this Feisty seems to half-think of itself as a Gutsy, & wants to finish the upgrade.

I think that’ll be waiting until I can borrow an ADSL link in Wynyard this coming week before trying an upgrade, else I’d have to sit through (it estimates) two gigabytes down the ’phone line at just over 5 kilobits per second (2E9 / 5E3 == 4E5 seconds, or 4 2/3 weeks @ 24x7 with no dropouts — er... no thanks).

I think I’ll grab a set of Gutsy CDs while I’m at it, both to update from & to install new systems with — a number of items (such as GIMP) appear to have hit sweet versions just in time to get Gutsy’ed.

BTW, I should point out from practical experience that doing the same thing with Mandriva should yield similar results, but trying it with MS-Windows would be a nightmare & chaos (likely only partially recoverable with a rescue CD & much fervent prayer).

Comments

sen said…
mail me your postal address and I'll send you some cd's DVD's again :-)

Popular posts from this blog

every-application-is-part-of-a-toolkit at work

I have a LibreOffice Impress slideshow that I wish to turn into a narrated video. 1. export the slideshow as PNG images (if that is partially broken — as at now — at higher resolutions, Export Directly as PDF then use ‘pdftoppm’ (from the poppler-utils package) to do the same). 2. write a small C program (63 lines including comments) to display those images one at a time, writing a config file entry for Imagination (default transition: ‘cross fade’) based on when the image-viewer application (‘display,’ from the GraphicsMagick suite) is closed on each one; run that, read each image aloud, then close each image in turn. 3. run ‘Imagination’ over the config file to produce a silent MP4 video with the correct timings. 4. run ‘Audacity’ to record speech while using ‘SMPlayer’ to display the silent video, then export that recording as a WAV file. 4a. optionally, use ‘TiMIDIty’ to convert a non-copyright-encumbered MIDI tune to WAV, then import that and blend it with the speech (as a quiet b

boundaries

pushing the actual boundaries of the physical (not extremes, the boundaries themselves) can often remove barriers not otherwise perceived. one can then often resolve an issue itself, rather than merely stonewalling at the physical consequences of the issue.

new life for an old (FTX) PSU, improved life for one human

the LEDs on this 5m strip happen to emit light centred on a red that does unexpectedly helpful things to (and surprisingly deeply within) a human routinely exposed to it. it has been soldered to a Molex connector, plugged into a TFX power supply from a (retired: the MoBo is cactus) Small Form Factor PC, the assorted PSU connectors (and loose end from the strip) have been taped over. the LED strip cost $10.24 including postage, the rest cost $0, the PSU is running at 12½% of capacity, consumes less power than a laptop plug-pack despite running a fan. trial runs begin today.