Skip to main content

To meter a meteor?

This article says:

Cooke was able to estimate the energy of impact, the dimensions of the crater, and the size and speed of the meteoroid. "It was a space rock about 10 inches (25 cm) wide traveling 85,000 mph (38 km/s)," he says.
If a rock like that hit Earth, it would never reach the ground. "Earth's atmosphere protects us," Cooke explains. "A 10-inch meteoroid would disintegrate in mid-air, making a spectacular fireball in the sky but no crater."

However, this article says:

[The] meteorite, found in the Morokweng crater [...]
[...]
The specific concentrations of platinum group elements in the newfound 10-inch (25 centimeter) meteorite place it in the "LL-ordinary chondrite" group of meteorites.
[...]
the Morokweng crater is a whopping 43 miles across (70 kilometers)

OK... so it appears that the choice is randomly selected from "nothing happens" to "a hole the size of Perth appears".

Which would you bet on?

Comments

Anonymous said…
I am not sure I would want to find out.
Leon RJ Brooks said…
If it was going to be the second option, I would like to know early enough to be elsewhere when it happened.

Popular posts from this blog

new life for an old (FTX) PSU, improved life for one human

the LEDs on this 5m strip happen to emit light centred on a red that does unexpectedly helpful things to (and surprisingly deeply within) a human routinely exposed to it. it has been soldered to a Molex connector, plugged into a TFX power supply from a (retired: the MoBo is cactus) Small Form Factor PC, the assorted PSU connectors (and loose end from the strip) have been taped over. the LED strip cost $10.24 including postage, the rest cost $0, the PSU is running at 12½% of capacity, consumes less power than a laptop plug-pack despite running a fan. trial runs begin today.

boundaries

pushing the actual boundaries of the physical (not extremes, the boundaries themselves) can often remove barriers not otherwise perceived. one can then often resolve an issue itself, rather than merely stonewalling at the physical consequences of the issue.

every-application-is-part-of-a-toolkit at work

I have a LibreOffice Impress slideshow that I wish to turn into a narrated video. 1. export the slideshow as PNG images (if that is partially broken — as at now — at higher resolutions, Export Directly as PDF then use ‘pdftoppm’ (from the poppler-utils package) to do the same). 2. write a small C program (63 lines including comments) to display those images one at a time, writing a config file entry for Imagination (default transition: ‘cross fade’) based on when the image-viewer application (‘display,’ from the GraphicsMagick suite) is closed on each one; run that, read each image aloud, then close each image in turn. 3. run ‘Imagination’ over the config file to produce a silent MP4 video with the correct timings. 4. run ‘Audacity’ to record speech while using ‘SMPlayer’ to display the silent video, then export that recording as a WAV file. 4a. optionally, use ‘TiMIDIty’ to convert a non-copyright-encumbered MIDI tune to WAV, then import that and blend it with the speech (as a quiet b...