RollerBlade wind turbine

This interesting wind turbine appears to be a useful blende between a propellor/turbine and an upright “tumbler” design.

The rotor pictured there is rated at 6kW at up to 16m/s and does all of the useful shutting down at high wind-speeds and such, can even be interrogated “live” through a GPM phone. They also have variants which literally light up, apparently making a very effective night-time display as well as providing much electric power in a safer, quieter way than normal “wind generators” would (English is weird, the things don’t generate wind as such).

No prices visible yet, but they look like they’d be relatively easy to set up in a back-yard, roof-top, hill-peak or paddock somewhere, compared to a propellor.

Comments

new life for an old (FTX) PSU, improved life for one human

the LEDs on this 5m strip happen to emit light centred on a red that does unexpectedly helpful things to (and surprisingly deeply within) a human routinely exposed to it. it has been soldered to a Molex connector, plugged into a TFX power supply from a (retired: the MoBo is cactus) Small Form Factor PC, the assorted PSU connectors (and loose end from the strip) have been taped over. the LED strip cost $10.24 including postage, the rest cost $0, the PSU is running at 12½% of capacity, consumes less power than a laptop plug-pack despite running a fan. trial runs begin today.

boundaries

pushing the actual boundaries of the physical (not extremes, the boundaries themselves) can often remove barriers not otherwise perceived. one can then often resolve an issue itself, rather than merely stonewalling at the physical consequences of the issue.

every-application-is-part-of-a-toolkit at work

I have a LibreOffice Impress slideshow that I wish to turn into a narrated video. 1. export the slideshow as PNG images (if that is partially broken — as at now — at higher resolutions, Export Directly as PDF then use ‘pdftoppm’ (from the poppler-utils package) to do the same). 2. write a small C program (63 lines including comments) to display those images one at a time, writing a config file entry for Imagination (default transition: ‘cross fade’) based on when the image-viewer application (‘display,’ from the GraphicsMagick suite) is closed on each one; run that, read each image aloud, then close each image in turn. 3. run ‘Imagination’ over the config file to produce a silent MP4 video with the correct timings. 4. run ‘Audacity’ to record speech while using ‘SMPlayer’ to display the silent video, then export that recording as a WAV file. 4a. optionally, use ‘TiMIDIty’ to convert a non-copyright-encumbered MIDI tune to WAV, then import that and blend it with the speech (as a quiet b

Plantagenet Penguinista

Search This Blog