Skip to main content

Pteroplanes

QuetzalcoatlusWho’d think that a leathery-looking flappy lizardy thing could fly smoothly and neatly?

This Quetzalcoatlus might have been as wide as about 18m & weigh several hundred kilos, not something to argue with.

It turns out that pterosaurs have distributed nervous clusters (think “multi-cpu brains” and you won’t be too far wide of the mark) which help them to smooth and regulate their flying surfaces, and also a neat bone — initially identified poorly — named a “pteroid” which acts kind of like a combination of flap and aileron, allowing these lizardly birds to take off slower (moderate breeze), land slower, and bank very neatly without having to tip their wings as dramatically as was once thought.

So a pterosaur essentially had the aereal gear already built-in to follow modern flight-control instructions — and on a lot less fuel than a Beechcraft or Cessna would need.

Sorry, it’s a paper article I have here (not internet), so no URLs. Please imagine some classy pterosaurs to match, if you like.

Comments

Leon RJ Brooks said…
BTW, an 18m wingspan is a pretty reasonable jet fighter.

Popular posts from this blog

new life for an old (FTX) PSU, improved life for one human

the LEDs on this 5m strip happen to emit light centred on a red that does unexpectedly helpful things to (and surprisingly deeply within) a human routinely exposed to it. it has been soldered to a Molex connector, plugged into a TFX power supply from a (retired: the MoBo is cactus) Small Form Factor PC, the assorted PSU connectors (and loose end from the strip) have been taped over. the LED strip cost $10.24 including postage, the rest cost $0, the PSU is running at 12½% of capacity, consumes less power than a laptop plug-pack despite running a fan. trial runs begin today.

boundaries

pushing the actual boundaries of the physical (not extremes, the boundaries themselves) can often remove barriers not otherwise perceived. one can then often resolve an issue itself, rather than merely stonewalling at the physical consequences of the issue.

every-application-is-part-of-a-toolkit at work

I have a LibreOffice Impress slideshow that I wish to turn into a narrated video. 1. export the slideshow as PNG images (if that is partially broken — as at now — at higher resolutions, Export Directly as PDF then use ‘pdftoppm’ (from the poppler-utils package) to do the same). 2. write a small C program (63 lines including comments) to display those images one at a time, writing a config file entry for Imagination (default transition: ‘cross fade’) based on when the image-viewer application (‘display,’ from the GraphicsMagick suite) is closed on each one; run that, read each image aloud, then close each image in turn. 3. run ‘Imagination’ over the config file to produce a silent MP4 video with the correct timings. 4. run ‘Audacity’ to record speech while using ‘SMPlayer’ to display the silent video, then export that recording as a WAV file. 4a. optionally, use ‘TiMIDIty’ to convert a non-copyright-encumbered MIDI tune to WAV, then import that and blend it with the speech (as a quiet b