Skip to main content

More food prices

Some more numbers from Kakulis Brothers (185 William Street, Northbridge; they don’t appear to have a website), this brought the mean cost down to AUD$10.75 per kilo:

Apricot kernels200$3.90$19.50
Pine nuts  $18.99
Almonds  $13.99
Brazil nuts  $12.99
Dried bananas  $9.80
Honey (tub)  $8.50
Sesame slice  $7.99
Pitted prunes  $7.50
Dried mango strips  $6.95
Olive oil4000$24.99$6.25
Dried apples  $5.99
Dried apricots (Chinese)  $5.99
Dried pineapple rings  $4.20
Dried pawpaw spears  $3.50
Urid Dahl  $3.00
Sunflower kernels  $2.99
Lima beans  $2.99
Borlotti beans  $2.70
Cannellini beans  $2.30
Black beans  $2.20
Sultanas  $1.99
Lentils  $1.75
Oats  $1.60
Popping corn  $1.50

It’s noteworthy that this is primarily dried food, the wet weight (and so the “wet value”) would be considerably higher.

Comments

Anonymous said…
Kakulas bros William st. no longer stock Lima beans. Your table shows them as in stock?
austux said…
They were indeed in stock ten years and two months ago. Why do you expect a static web page to keep track of changes in reality?

Popular posts from this blog

new life for an old (FTX) PSU, improved life for one human

the LEDs on this 5m strip happen to emit light centred on a red that does unexpectedly helpful things to (and surprisingly deeply within) a human routinely exposed to it. it has been soldered to a Molex connector, plugged into a TFX power supply from a (retired: the MoBo is cactus) Small Form Factor PC, the assorted PSU connectors (and loose end from the strip) have been taped over. the LED strip cost $10.24 including postage, the rest cost $0, the PSU is running at 12½% of capacity, consumes less power than a laptop plug-pack despite running a fan. trial runs begin today.

boundaries

pushing the actual boundaries of the physical (not extremes, the boundaries themselves) can often remove barriers not otherwise perceived. one can then often resolve an issue itself, rather than merely stonewalling at the physical consequences of the issue.

every-application-is-part-of-a-toolkit at work

I have a LibreOffice Impress slideshow that I wish to turn into a narrated video. 1. export the slideshow as PNG images (if that is partially broken — as at now — at higher resolutions, Export Directly as PDF then use ‘pdftoppm’ (from the poppler-utils package) to do the same). 2. write a small C program (63 lines including comments) to display those images one at a time, writing a config file entry for Imagination (default transition: ‘cross fade’) based on when the image-viewer application (‘display,’ from the GraphicsMagick suite) is closed on each one; run that, read each image aloud, then close each image in turn. 3. run ‘Imagination’ over the config file to produce a silent MP4 video with the correct timings. 4. run ‘Audacity’ to record speech while using ‘SMPlayer’ to display the silent video, then export that recording as a WAV file. 4a. optionally, use ‘TiMIDIty’ to convert a non-copyright-encumbered MIDI tune to WAV, then import that and blend it with the speech (as a quiet b...